Skip to main content

Home Product introduction Static-related products Charging equipment Pinning system

Pinning system

pinning_01.jpg

This system makes molten resin extruded from a T-die adhere electrostatically to its rotating cooling drum, creating uniform resin sheets without pinning bubbles. Systems with a wire electrode and a band electrode are available and we will propose the appropriate one to suit your specifications. We also offer an optional automatic positioning system, which automatically recovers a set pinning position when the system is restarted, thereby significantly shortening the time taken to redo the setting.

 

Configurations

  • DC high voltage power source
  • Wire-/band-electrode supplying and winding unit
  • Spark cutter (optional)
  • Heating power supply (optional)
  • Automatic positioning system (optional)

List of DC high voltage power source

Model Maximum rated output Output control Performance Safety function(alarm function) External dimensions
Output voltage Output current Constant voltage Constant current Percentage ripple Power supply voltage regulation Excess voltage Excess current Spark W×D×H(mm)
(kV) (mA) (% or below) (% or below) Trip Count
SDH-1505PN 15 5 0.03 0.1 480×500×199
SDH-2005PN 20 5 0.03 0.1 480×500×199
SDH-1010PN 10 10 0.03 0.1 480×500×199
SDH-1015PN 10 15 0.03 0.1 480×500×199
SDH-2010PN 20 10 0.03 0.1 480×500×199
SDH-2015PN 20 15 0.03 0.1 480×500×199
SDH-3010PN 30 10 0.03 0.1 480×500×199
SDH-2020PN 20 20 0.03 0.1 480×500×249
SDH-3020PN 30 20 0.05 0.1 480×500×249
SDH-3030PN 30 30 0.05 0.1 480×500×249
SDH-5015PN 50 15 0.05 0.1 Specifications to be discussed
SDH-20200PN 20 200 0.5 0.1 Specifications to be discussed
SDH-20300PN 20 200 0.5 0.1 Specifications to be discussed

 

pinning_02.jpg

Inquiries

Products in related categories

Static-related products > Charging equipment


Return to Top Page